Electronics Industry Protective Agent CH123

• Material surface must be clean and dry.
• Spraying, brushing and soaking can be used. Spray with suitable low pressure, 10-15cm distance away or airless sprayer is suitable for this application
• Apply the material on substrate until it’s thoroughly saturated.
• Don’t put it to moisture or rain and dry it in natural air. After full curing time at 24 hours, it will form an outstanding hydrophobic, oil proof effect.
• Advise to do a test when the temperature is between 2-45°C (35.6-113°F)
• Maximum coverage is 80-100 square meters per liter.

(But depends on the density of various substrates.).

• Keep sealed and store in cool and dry place, use within 18 months.
• Keep away from children.
• Keep away from flame and heat.