Plastic Protective Agent - Smooth Finish Type DH709

GRASi® DH709 is ready to use for waterproof treatment.

Plastic surface must be clean and dry.

Smearing,spraying,brushing,soaking are suitable for application. Please apply under the condition of natural ventilation.

Smearing

Using clean soft and high density sponge to dip in the product , smear the plastic surface evenly.

Spraying

Spray with suitable low pressure, 10-15 cm distance away ,using clean soft and high density sponge to smear the plastic surface evenly.

Brushing

Brushing on small area,then using clean soft and high density sponge to smear the plastic surface evenly.

Soaking

Suitable for special objects , soak for liquid,take it out, using clean soft and high density sponge to smear the plastic surface evenly.

Cautions:

• Don't put the treated material to moisture or rain place,dry in natural air.
• Advise to use when the temperature is between 2℃- 45℃（35.6-113°F).

After full curing time at 2-5 hours, it will form an outstanding waterproof protection effect.

Maximum coverage per liter is 80-100 square meters, but depends on environmental conditions and usage method.

• Keep sealed and store in cool and dry place below.
• 40℃（104°F), use within 18 months.
• Keep away from children.
• Keep away from flame and heat.