Silicone-Based Glass Protective Agent

GRASi® CB826 is ready to use for waterproof treatment. Glass surface must be clean and dry.

Smearing, spraying, brushing, soaking are suitable forapplication. Please apply under the condition of natural ventilation.

Smearing

Using clean soft and high density sponge to dip in the product, smear the glass surface evenly.

Spraying

Spray with suitable low pressure, 10-15 cm distance away, using clean soft and high density sponge to smear the glass surface evenly.

Brushing

Brushing on small area,then using clean soft and high density sponge to smear the glass surface evenly.

Soaking

Suitable for special objects , soak for liquid,take it out, using clean soft and high density sponge to smear the glass surface evenly.

Cautions:

• Don't put it to moisture or rain, and dry it in natural air.
• Advise to use when the temperature is between 2℃-45℃（35.6-113°F).
• After full curing time at 24 hours, it will form an outstanding waterproof protection effect.
• Maximum coverage per liter is 80-100 square meters, but depends on environmental conditions and usage method.

• Keep sealed and store in cool and dry place below 40℃（104°F), use within 18 months
• Keep away from children.
• Keep away from flame and heat.